Published at Wednesday, September 28th, 2016 - 16:48:13 PM. Door. By john.
Hinge terminology : Components : Pin The rod that holds the leaves together, inside the knuckle. Knuckle The hollow—typically circular—portion creating the joint of the hinge through which the pin is set. The knuckles of either leaf typically alternate and interlock with the pin passing through all of them. (aka. loop, joint, node or curl) Leaf The portions (typically two) that extend laterally from the knuckle and typically revolve around the pin. Characteristics End Play Axial movement between the leaves along the axis of the pin. This motion allows the leaves to rotate without binding and is determined by the typical distance between knuckles (knuckle gap) when both edges of the leaves are aligned. Gauge Thickness of the leaves. Hinge Width Length from the outer edge of one leaf to the outer edge of the other leaf, perpendicularly across the pin(aka open width). Hinge Length The length of the leaves parallel to the pin. Knuckle Length The typical length of an individual knuckle parallel to the pin. Leaf Width Length from the center of the pin to the outer edge of the leaf. Pitch Distance from the end of a knuckle to the same edge of its adjacent knuckle on the same leaf Slop A colloquialism referring to loose angular movement of the leaves relative to the pin.
Scissor doors : Scissor doors (also wing doors, beetle-wing doors, turtle doors, switchblade doors, swing-up doors, Lamborghini doors, and Lambo doors) are automobile doors that rotate vertically at a fixed hinge at the front of the door, rather than outward as with a conventional door.
Any content, trademark’s, or other material that might be found on the PapihillsTour.com website that is not PapihillsTour.com’s property remains the copyright of its respective owner/s. In no way does PapihillsTour.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.