By john. Door. Published at Friday, November 25th, 2016 - 12:25:13 PM.
Dutch door : A Dutch door (American English), stable door (British English), or half door (Hiberno English), is a door divided horizontally in such a fashion that the bottom half may remain shut while the top half opens. They were known in early New England as a double-hung door. The initial purpose of this door design was to keep animals out of farmhouses or to keep children inside while allowing light and air to filter through the open top; essentially combining a door with a fairly large window. When the top half was open they also allowed a breeze, but stopped the wind from blowing dirt into the house. This type of door was common in the Netherlands in the seventeenth century and appears in Dutch paintings of the period. They were also commonly found in the Dutch cultural areas of New York and New Jersey before the American Revolution. Dutch doors are often used in North-American passenger train cars to allow crewmen to interact safely with other employees not aboard their trains (or simply to visually inspect their own train) without risking falling from the train. Recent operating rules changes in Canada have rendered the Dutch-doors obsolete, although older rolling stock retains the doors. Similar doors were once commonplace in Irish houses, called half-doors (Irish: leathdoras or comhla bheag). According to The Irish Times, A traditional half-door is really a door and a half – a full door that opens inwards and a half door set to the front of the frame that opens outwards. They were designed to keep poultry and pigs from entering the house, as well as allowing air and sunlight into the usually dark and smoky cottages. The term is also applied to the modified rear doors on selected GMC Safaris and Chevrolet Astros that have a flip up rear window and two small half-size doors underneath.
Large structures Hinges appear in large structures such as elevated freeway and railroad viaducts. These are included to reduce or eliminate the transfer of bending stresses between structural components, typically in an effort to reduce sensitivity to earthquakes. The primary reason for using a hinge, rather than a simpler device such as a slide, is to prevent the separation of adjacent components. When no bending stresses are transmitted across the hinge it is called a zero moment hinge.
Door types There are many types of door hinges. The main types include: Spring hinge a spring-loaded hinge made to provide assistance in the closing or the opening of the hinge leaves. A spring is a component of a hinge, that applies force to secure a hinge closed or keep a hinge opened. Barrel hinge a sectional barrel secured by a pivot. A barrel is a component of a hinge, that has a hollow cylinder shaped section where the rotational bearing force is applied to the pivot, and may also have a screw shaped section for fastening and/or driving the pivot. Pivot hinges which pivot in openings in the floor and the top of the door frame. Also referred to as a double-acting floor hinge. This type is found in ancient dry stone buildings and rarely in old wooden buildings. These are also called haar-hung doors. They are a low cost alternative for use with light weight doors. Butt/Mortise hinges usually in threes or fours, which are inset (mortised) into the door and frame. Most residential hinges found in the U.S. are made of steel, although mortise hinges for exterior doors are often made of brass or stainless steel to prevent corrosion. Case hinges Case hinges are similar to a butt hinge however usually more of a decorative nature most commonly used in suitcases, briefcases and the like. Continuous hinges, or piano hinges This type of hinge is also known as a piano hinge. It runs the entire length of the door, panel, or box. Continuous hinges are manufactured with or without holes. These hinges also come in various thicknesses, pin diameters, and knuckle lengths. Used for furniture doors (with or without self-closing feature, and with or without damping systems). They are made of two parts: One part is the hinge cup and the arm, the other part is the mounting plate. Also called "cup hinge", or "Euro hinge", as they were developed in Europe and use metric installation standards. Most such concealed hinges offer the advantage of full in situ adjustability for standoff distance from the cabinet face as well as pitch and roll by means of two screws on each hinge. Butterfly hinges, or Parliament (UK) Hinges These were known as dovetail hinges from the 17th century onwards and can be found on old desks and cabinets from about 1670 until the 18th century. The form of these hinges varied slightly between manufacturers, and their size ranged from the very large for heavy doors to the tiniest decorative hinge for use on jewellery boxes. Many hinges of this type were exported to America to support the home trades limited supply. They are still found to be both fairly cheap and decorative, especially on small items. Flag hinges A flag hinge can be taken apart with a fixed pin on one leaf. Flag hinges can also swivel a full 360 degrees around the pin. Flag hinges are manufactured as a right hand and a left hand configuration. Strap hinges An early hinge and used on many kinds of interior and exterior doors and cabinets. H hinges Shaped like an H and used on flush-mounted doors. Small H hinges (3–4 in or 76–102 mm) tend to be used for cabinets hinges, while larger hinges (6–7 in or 150–180 mm) are for passage doors or closet doors. HL hinges Large HL hinges were common for passage doors, room doors and closet doors in the 17th, 18th and even 19th centuries. On taller doors H hinges were occasionally used in the middle along with the HL hinges. Other types include: • Counterflap hinge • Flush hinge • Coach hinge • Rising Butt hinge • Double action spring hinge • Double action non-spring • Tee hinge • Friction hinge • Security hinge • Cranked hinge or stormproof hinge • Lift-off hinge • Self closing hinge
A car door is a type of door, typically hinged, but sometimes attached by other mechanisms such as tracks, in front of an opening which is used for entering and exiting a vehicle. A vehicle door can be opened to provide access to the opening, or closed to secure it. These doors can be opened manually, or powered electronically. Powered doors are usually found on minivans, high-end cars, or modified cars.
Any content, trademark’s, or other material that might be found on the PapihillsTour.com website that is not PapihillsTour.com’s property remains the copyright of its respective owner/s. In no way does PapihillsTour.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.